Choose your basic woodcarving tools

There’s really not a lot to it. Here's what you'll need if you're just starting out:

A Carving Knife

Purpose-built knives intended for whittling tend to have fixed blades and longer handles. Invest in a good knife – it will be worth it.

An Axe

Here’s your chance to be a lumberjack, because an axe is an essential tool. Get a small axe that you can grip easily.

A Sharpening Stone

Carving wood will eventually dull any blade, so a good ceramic sharpening stone is essential. Angle the blade between 10-20 degrees and swipe it back and forth across the sharpening stone.

Choose your Dremel tools for carving wood

Raring to go? All Dremel® Rotary-Tools can be used for carving. It’s best to use the Flexible Shaft with the bigger Dremel tools, as this will make manoeuvring much easier.

The Dremel accessories you can use for carving are:

• High Speed Cutter 7.8 mm (114)
• High Speed Cutter 7.2 mm (134)
• High Speed Cutter 4.8 mm (192)
• Engraving Cutter 2.4 mm (107)
• Tungsten Carbide Cutter ball tip 3.2 mm (9905)

Choose your Dremel tools for smoothing

For smoothing you can use EZ SpeedClic: Finishing Abrasive Buffs with different grits. A range between 180-280 should be good for small projects. To hold and use the wheels, you’ll also need a mandrel. Specifically, the EZ SpeedClic Mandrel (EZ402) for the sanding buffs and the 401 Mandrel for the polishing wheels.

TIP: The Detailer’s Grip Attachment is also great for extra comfort during your hobby and DIY projects.

Know the best woods for woodcarving

If you're just starting out with woodcarving, it's better to choose a softwood like birch, limewood, pine, willow or horse chestnut. These are easier to carve. Soon, when you’re more experienced, you can use birch burl, cherrywood, maple, apple, pear, olive or walnut. All of these contain beautiful patterns and colours, and will add new elements to your designs.

Know what to avoid when choosing wood for carving

If you're getting your wood from a craft store, chances are you won't find many growth rings or knots in it. If you're getting it from a lumberyard, however, these might be more of an issue. Remember, if you're a woodcarving beginner it can be difficult to carve around these natural formations. Get the cleanest wood possible and come back to the tricky stuff later. Practice makes perfect.

Take the correct safety precautions

Always keep your knife sharp

Sharpening your knives not only makes your work easier, it's safer too. It's far more likely you'll be injured using a dull blade than a sharp one.

Wear a glove

Always wear it on the hand that isn’t holding the carving knife. Leather hide work gloves will not only protect your hands, they'll be more resistant to damage and last longer.

Wear your safety glasses

It's no fun getting wood chips in your eyes, so protect your precious sight, and always wear a good pair of safety glasses when you're sawing, chopping or using a Dremel accessory.

Dust mask

Always wear a dust mask to make sure you’re not inhaling the dust created by carving, cutting, sanding or polishing.

Practice drawing your design first

Your woodcarving piece might change as you continue, but at the start it’s important to stick to perfecting its basic shape. Before you start whittling away, trace out your design lightly with a pencil. Staying within the lines of your drawing will help keep you on track when the axe and carving knife come out.

Set aside some time just for woodcarving

There will be times during your woodcarving projects that you'll wish you could speed things up; especially the drying process. But take things slowly and try to enjoy each step of the process. Carving wood is not a hobby you can rush, and when you hold your finished piece you'll be glad you took your time.

By now you're probably excited to start your first woodcarving project. Take a look at our 10-step guide to carving a wooden spoon. Or read: How to Avoid Failures while Carving Wood.